Full Demonstration
Wood Finished Countertops
Step-by-step
Demonstration of the French Oak Countertop kit
Clean It
Remember to Prep the Surface
- Wipe Down with denature alcohol mixed with water or with Krud Kutter®
NEVER USE TSP PRODUCTS
(TSP will cause wood based coatings to not adhere properly)
Prime It
with Retique It® Wood'n Primer™
- Brush, spray or roll on 2 coats of Retique It® Wood'n Primer™
- Make final strokes long in the direction you want the grain
Grain It
with Retique It® Wood'n Stain™
If you want a smooth finish, you can skip this step. Your brush strokes will make a subtle grain.
- Brush on a thin coat of Wood'n Stain™ in plank size sections
- Pull the graining tool through each section while coat is still wet
Stain It
Apply Wood'n Stain™ over the grain
- Brush on Retique It® Wood'n Stain™
- Just brush it on. DO NOT WIPE IT OFF like other stains
- If you want a deeper finish, brush on more coats of Wood'n Stain™
1 Coat
2 Coats
3 Coats
Add Gel StainOptional
- Apply 1 to 2 coats of Gel stain with a lint-free cloth
- Allow stain to dry for 2 hours between coats or use a blow dryer to speed up the process.
Retique It®
Countertop Kit - Kitchen Island - French Oak
Color Options
Top Coat Sheen:Matte (Most Popular)
Quantity:

