Table and Console Makeover

Table and Console Makeover

Roberta Burke with Easter Shore Chic

I know I just posted about the class, but I didn't show you any beautiful furniture that I've been working on.Here is a really neat end table that I painted to match the buffet I had done previously.Painted with Retique It Snow, Midnight Black and Liquid wood with Java Stain. Sealed with Polyacrylic.What do you think of mid-century modern furniture? It used to not be my thing... but I'm starting to really appreciate the art of it. It can be very pretty with a Boho feel.

How It's Done

Paint It

• Pour 1-part denatured alcohol (or rubbing alcohol) and 1-part water into a spray bottle or bowl.  Wipe surface down with mixture.

• If surface is shiny or it has a wax/furniture polish on it, then scuff the entire surface up with sandpaper to give it tooth (This is just to remove any wax and give better adherence for the base coat.)

• Patch any divots or holes with Retique It® Mud.

• Apply one coat of Retique It® Light Wood as your base coat.

• Clean your brush while you give the project 2 hours to dry completely.  If you are limited on time, then use a blow dryer (Dry time may take as little as 15 minutes with the use of a blow dryer on high heat)

• Apply a second coat of light wood.

• Make your final strokes long and even.

• Clean your brush while you give the project another 2 hours to dry completely (Consider using a blow dryer again)

• Move your hand over the surface, if any bumps or specs are detected, then lightly sand them smooth.

• Apply the first coat as a thin layer.

• Apply the second coat thick and smooth finish in long even strokes

• Apply a third coat in any area that is not completely covered.

• Clean your brush between each layer while you allow 2 hours to dry completely.  If you are limited on time, then use a blow dryer (Dry time may take as little as 15 minutes with the use of a blow dryer on high heat)

Grain It (Optional)

• Apply a thin coat of either Dark or Bleached Liquid Wood in small sections at a time about the size of a wood plank. This is so that the Liquid Wood does not have time to dry before you grain it.

• While the liquid wood is still wet, pull your graining tool in long even strokes across the entire piece.  Rolling the graining tool up or down will create the grain variation and knots. Do not stop when pulling the graining tool from one end of the surface to the other.  Try keeping one long continuous movement.  

• Wipe your graining tool off with a damp paper towel between strokes.

• If you don't like the grain, then pull the graining tool over it again. If you still don't like it, then paint more liquid wood over it and start on that stroke again.

• Wash your brush while you allow your project to dry for 2 hours or use a blow dryer to speed up your dry time.

Stain It (where you want a wood finish)

Lightly pull excess stain off with a lint-free cloth after giving it a couple of minutes to absorb

Each coat will make your finish darker. You can do between 1 and 4 coats...

Seal It

• While Ultratique is an all-in-one, liquid wood must be sealed for durability.

The more thin coats the greater the durability.

If you are painting a tabletop or other surface that requires increased durability, it is advisable to add more layers of protect. Ultratique is the equivilant of one layer of tripletique.

The Products You Will Need

More color options
Classic Black
Black Walnut
Red Mahogany
Vintage Blue
White Wash
Dark Oak
Barn Wood
Rustic Red
Canary Yellow
Weathered Wd
Old Oak
Dark Cherry
Ruby Red

If you're not sure about the look you want try painting a test surface with the listed steps.

Special thanks to

Roberta Burke with Eastern Shore Chic on Facebook